Loader To Dozer — Survey Verification

What Verification Evidence Proves

Verification evidence should answer the acceptance question asked. Elevation measurements establish geometry; material records and relevant tests address layer condition. Neither should be silently substituted for the other.

Before moving material

Define the checks needed for the finished purpose.

Receiving operation and checks

Hand over accepted areas and clearly identify exceptions. Check that the evidence concerns the same layer and work zone.

An instrument display is not a complete acceptance record.

Loader to Grading Workflow

A loader handles stockpiles and delivers material; the next grading operation distributes that material into the required surface. Avoid treating irregular loader deposits as a finished layer.

Before moving material

Confirm material class and the receiving layer's requirements.

Receiving operation and checks

Compact or prepare the layer for its next use. Check the depth and consistency between deposited loads.

Scraper loading and loader bucket handling are different capabilities.

GNSS Machine Control

GNSS machine control combines positioning, machine geometry and design information. An accurate receiver position is not automatically an accurate cutting-edge position.

Before moving material

Confirm corrections, sensor arrangement and the coordinate reference.

Receiving operation and checks

Check the completed surface with an independent method. Inspect offsets, design revision and correction status when results disagree.

Compatibility must be confirmed for the actual machine and control installation.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology